Search results for "fusion reactor"

Eurofusion-DEMO Divertor - Cassette Design and Integration

2020

International audience; The Eurofusion-DEMO design will complete the Pre Conceptual Design phase (PCD) with a PCD Gate, named G1, scheduled to take place in Q4 2020 that will focus on assessing the feasibility of the plant and its main components prior to entering into the Conceptual Design phase. In the paper first an overview is given of the Eurofusion-DEMO Divertor Assembly including design and interface description, systems and functional requirements, load specification, system classification, manufacturing procedures and cost estimate. Then critical issues are discussed and potential design solutions are proposed, e.g.:- Neutron material damage limits of the different (structural) mat…

Integral approach to the safety design of the EU-DEMO Helium-Cooled Pebble Beds with reference to the associated relevant systems

2020

Thermo-mechanical testing of Li-ceramic for the helium cooled pebble bed (HCPB) breeding blanket

2004

The helium cooled pebble bed (HCPB) Test blanket module (TBM) for the DEMO Reactor foresees the utilization of lithiate ceramics as breeder in form of pebble beds. The pebbles are organized in several layers alternatively stacked among couples of cooling plates (CP). ENEA has launched an experimental programme for the out-of-pile thermo-mechanical testing of mock-ups simulating a portion of the HCPB-TBM. The programme foresees the fabrication and testing of different mock-ups, to be tested in the HE-FUS3 facility at ENEA Brasimone. The paper describes the HELICHETTA III campaign carried-out in 2003. In particular, the test section layout, the pebble filling procedure, the experimental set-u…

ODS ferritic steels obtained from gas atomized powders through the STARS processing route: Reactive synthesis as an alternative to mechanical alloying

2018

Authors acknowledge ALBA synchrotron (Spain) for the provision of beamtime on the beam line BL22-CLAESS (Proposal 2016081797). Transmission electron microscopy observations were accomplished at Centro Nacional de Microscopía Electrónica, CNME-UCM. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Financial support from Basque Government through the ELKARTEK ACTIMAT 2016 project is also acknowledged.

Overview of the HCPB Research Activities in EUROfusion

2018

In the framework of the EUROfusion’s Power Plant Physics and Technology, the working package breeding blanket (BB) aims at investigating four different BB concepts for an EU demonstration fusion reactor (DEMO). One of these concepts is the helium-cooled pebble bed (HCPB) BB, which is based on the use of pebble beds of lithiated ternary compounds and Be or beryllides as tritium breeder and multiplier materials, respectively, EUROFER97 as structural steel and He as coolant. This paper aims at giving an overview of the EU HCPB BB Research and Development (R&D) being developed at KIT, in collaboration with Wigner-RCP, BUTE-INT, and CIEMAT. The paper gives an outline of the HCPB BB design evolut…

Overview of the DEMO staged design approach in Europe

2019

This paper describes the status of the pre-conceptual design activities in Europe to advance the technical basis of the design of a DEMOnstration Fusion Power Plant (DEMO) to come in operation around the middle of this century with the main aims of demonstrating the production of few hundred MWs of net electricity, the feasibility of operation with a closed-tritium fuel cycle, and maintenance systems capable of achieving adequate plant availability. This is expected to benefit as much as possible from the ITER experience, in terms of design, licensing, and construction. Emphasis is on an integrated design approach, based on system engineering, which provides a clear path for urgent R&D …

Experimental Assessment of a Flat Sandwich-Like Self-Powered Detector for Nuclear Measurements in ITER Test Blanket Modules

2018

Neutron and gamma flux measurements in designated positions in the test blanket modules (TBMs) of ITER will be important tasks during its campaigns. Investigations on self-powered detectors (SPDs), a class of reactor flux monitors are undertaken in the framework of an ongoing project on development of nuclear instrumentation for European ITER TBMs. This paper reports the findings of experiments performed with an SPD in flat sandwich-like geometry. A detector with vanadium emitter is chosen for preliminary studies. Its irradiation in a thermal neutron field gives a proof of the principle of flat SPDs. It is further irradiated in the mixed neutron-gamma field of a 14-MeV neutron generator and…

Divertor of the European DEMO: Engineering and technologies for power exhaust

2022

International audience; In a power plant scale fusion reactor, a huge amount of thermal power produced by the fusion reaction and external heating must be exhausted through the narrow area of the divertor targets. The targets must withstand the intense bombardment of the diverted particles where high heat fluxes are generated and erosion takes place on the surface. A considerable amount of volumetric nuclear heating power must also be exhausted. To cope with such an unprecedented power exhaust challenge, a highly efficient cooling capacity is required. Furthermore, the divertor must fulfill other critical functions such as nuclear shielding and channeling (and compression) of exhaust gas fo…

Integrated design of breeding blanket and ancillary systems related to the use of helium or water as a coolant and impact on the overall plant design

2021

Currently, for the EU DEMO, two Breeding Blankets (BBs) have been selected as potential candidates for the integration in the reactor. They are the Water Cooled Lithium Lead and the Helium Cooled Pebble Bed BB concepts. The two BB variants together with the associated ancillary systems drive the design of the overall plant. Therefore, a holistic investigation of integration issues derived by the BB and the installation of its ancillary systems has been performed. The issues related to the water activation due to the 16N and 17N isotopes and the impact on the primary heat transfer systems have been investigated providing guidelines and dedicated solution for the integration of safety devices…

Overview of the JET results in support to ITER

2017

The 2014–2016 JET results are reviewed in the light of their significance for optimising the ITER research plan for the active and non-active operation. More than 60 h of plasma operation with ITER first wall materials successfully took place since its installation in 2011. New multi-machine scaling of the type I-ELM divertor energy flux density to ITER is supported by first principle modelling. ITER relevant disruption experiments and first principle modelling are reported with a set of three disruption mitigation valves mimicking the ITER setup. Insights of the L–H power threshold in Deuterium and Hydrogen are given, stressing the importance of the magnetic configurations and the recent m…